Silicone Pressure Cooker Rubber Seal Ring Replacement 4L, 5L, 8L, 10L Spare Parts
When you use a pressure cooker regularly, the gasket/seal ring takes a lot of wear. The SOGA pressure cooker seal ring is the smart replacement part for owners of 4L, 5L, 8L and 10L models-especially if you want reliable performance, safe pressure cooking, and avoid the risk of steam leakage or under-pressure cooking. Sold by HeyHey Australia, this seal ring gives you the convenience of a “like-new” lid performance without replacing the entire cooker.
Restore full pressure capacity: Over time, the original seal on your pressure cooker may harden, crack or lose elasticity. By replacing it with this SOGA seal ring, you restore the airtight compression your cooker was designed for.
Food-grade material for safety: Made of high-temperature resistant silicone, non-toxic and approved for repeated use in pressure cooking. (Compatible with 4 L, 5 L, 8 L, 10 L sizes)
Fits popular SOGA/Benser models: Built specifically for use with SOGA (and compatible Benser) pressure cookers in Australia - so you’re choosing part reliability rather than a general universal fit.
Economical maintenance: Instead of replacing the whole cooker, the seal ring is a cost-effective way to keep using your appliance safely and efficiently.
Simple to install: No need for technical service. Just remove the old gasket, clean the lid groove and fit this one - you’re ready to cook again.
Material: Food-grade high-temperature silicone.
Sizes available: 4 L (≈20 cm diameter), 5 L (≈22 cm), 8 L (≈26 cm), 10 L (≈26 cm)
Compatibility: Designed for SOGA/Benser branded pressure cookers; check your lid diameter and model for accurate fit.
Package includes: 1 × Seal ring per unit (size variant chosen)
Usage: Ideal when you notice pressure drop, steam escaping around lid, or gasket wear.
Check compatibility: Confirm your pressure cooker’s model and lid size match one of the listed sizes (4-10 L).
Remove the old seal ring: Unplug/un-heat your cooker, let cool. Remove the lid, detach the worn gasket carefully.
Clean the lid groove: Wipe away any grease or residue so the new seal sits flush.
Fit the new ring: Align it properly into the groove and press evenly around the circumference.
Test the cooker: Close lid, start cooking with a small water load to ensure steam is retained and there’s no hissing around the lid.
Maintain regularly: Every few uses, check the ring for hardening or cracking. Replace when you notice changes in performance (e.g., longer cooking time, steam escape).
Cleaning tip: Remove the ring periodically, wash with warm soapy water, rinse and dry completely before reseating.
Safe cooking – A new gasket ensures your cooker reaches and holds pressure safely, reducing under-cooked meals or long cook times.
Extended appliance life – Rather than replacing the full unit when it’s just the seal ring that’s worn, you extend the cooker’s usable life.
Improved kitchen efficiency – With steam containment restored, your meals cook properly, on schedule, and energy is used more effectively.
Hassle-free upkeep – Simple maintenance item you can fit yourself in minutes, no technician needed.
Trusted brand & supplier – SOGA is known for reliable kitchen equipment, and HeyHey Australia ensures you get genuine parts and shipping across Australia.
Home cooks who already own a SOGA (or compatible Benser) 4 L, 5 L, 8 L or 10 L pressure cooker and need to replace their gasket.
Anyone noticing reduced pressure performance, steam leakage, or longer cooking times with their pressure cooker.
Kitchen managers in cafés or light commercial settings using SOGA pressure cookers and seeking economical maintenance.
Buyers looking for genuine replacement parts rather than generic universal gaskets that may not fit accurately.
How do I know if I need to replace the seal ring?
Look for signs such as lid steam escaping, cooker not reaching full pressure, gasket surface becoming hard or cracked, or cook times lengthening. These indicate the ring has lost elasticity and needs replacing.
Will this ring fit other brands of pressure cookers?
This seal ring is designed specifically for SOGA/Benser cookers in sizes 4L-10L. It may not fit other brands due to differing lid diameters or groove designs. Always check your model and diameter first.
How often should I replace the seal ring?
It depends on usage. If used frequently, consider replacing every 12-24 months or when you observe performance changes. Occasional home use may last longer if maintained well.
Does installation require tools or a technician?
No special tools or technician are required. Just ensure the cooker is cool, lid removed, old ring taken off, groove cleaned, and new ring fitted correctly.
How do I maintain the new gasket to maximise its life?
After each use, allow the lid to release pressure fully and cool. Clean the groove. Wash the ring periodically with mild detergent. Avoid harsh herb/acid residues sitting long on the seal. Inspect for wear.
What happens if I keep using a worn gasket?
Using a degraded seal reduces pressure build-up, can cause steam leakage, longer cooking times, or even safety concerns. Replacing the ring improves performance and ensures safe operation.
Does HeyHey include warranty or return policy for this part?
Yes-HeyHey supports standard returns and warranty for parts. Refer to HeyHey’s “Returns & Warranty” section for full details before purchase.
